Filter
Top Products
Chapter 47 IGMP Commands
IES-612-51A User’s Guide
314
47.2.3 IGMP Snoop Disable Command
Syntax:
ras> switch igmpsnoop disable
This command turns off IGMP proxy or snooping.
The following example sets the device to not use IGMP proxy or snooping.
47.3 IGMP Filter Commands
Use the IGMP filter commands to define IGMP filter profiles and assign them to DSL ports.
IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a
service available to a specific IGMP multicast group. You can configure an IGMP filter profile
for an IGMP multicast group that has access to a service (like a SIP server for example). Then
you can assign the IGMP filter profile to DSL ports that are allowed to use the service.
47.3.1 IGMP Filter Show Command
Syntax:
ras> switch igmpfilter show [portlist]
where
This command displays which IGMP filter profile a DSL port(s) is using.
The following example displays which IGMP filter profile DSL port 5 is using.
47.3.2 IGMP Filter Set Command
Syntax:
ras> switch igmpfilter set [<port>|*] <name>
Figure 173 IGMP Snoop Disable Command Example
ras> switch igmpsnoop disable
[portlist] =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
Figure 174 IGMP Filter Show Command Example
ras> switch igmpfilter show 5
port profile
--------------------------------------
9 DEFVAL