Filter
Top Products
Chapter 50 Firmware and Configuration File Maintenance Commands
IES-612-51A User’s Guide
337
Use an FTP client to connect to the IES-612-51A.
Enter the management password (
1234 by default).
Use
get to transfer the configuration file to the computer. The configuration file on the system
(that you want to backup to the computer) is named
config-0.
Quit FTP.
50.3.2 Edit Configuration File
Open the config-0 file via Notepad (see the following example) and edit to a desired
configuration.
Figure 201 Example: Use an FTP Client to Connect to the IES-612-51A
C:\> ftp <IES-612-51A IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Figure 202 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 203 Example: Get the Configuration File config-0
ftp> get config-0
Figure 204 Example: Close FTP Client
ftp> quit