Filter
Top Products
Chapter 41 Commands Summary
IES-612-51A User’s Guide
265
dsnompsd <port number>
[<max nominal
psd>]
Display or set Maximum nominal
transmit PSD in the DS direction
H/H
uscarrier <port number>
[<m0> <m1>]
Display or set US carrier mask
from tone 0 to 63
H/H
dscarrier0 <port number>
[<m1> <m2> <m3>
<m4> <m5> <m6>
<m7>]
Display or set DS carrier mask
from tone 32 to 255
H/H
dscarrier1 <port number>
[<m0> <m1> <m2>
<m3> <m4> <m5>
<m6> <m7>]
Display or set DS carrier mask
from tone 256 to 511
H/H
annexl enable <portlist> Turns on the Annex L feature on
the specified port(s).
H/H
annexl disable <portlist> Turns off the Annex L feature on
the specified port(s).
H/H
annexl show <portlist> Displays the Annex L feature
setting for the specified port(s).
M/L
annexi enable <portlist> Turns on the Annex I feature on
the specified port(s).
H/H
annexi disable <portlist> Turns off the Annex I feature on
the specified port(s).
H/H
annexi show <portlist> Displays the Annex I feature
setting for the specified port(s).
M/L
annexm enable <portlist> Turns on the Annex M feature on
the specified port(s).
H/H
annexm disable <portlist> Turns off the Annex M feature on
the specified port(s).
H/H
annexm show <portlist> Displays the Annex M feature
setting for the specified port(s).
M/L
sra enable <portlist> Turns on Seamless Rate
Adaptation (SRA) ADSL2+ on the
specified port(s).
H/H
sra disable <portlist> Turns off SRA ADSL2+ on the
specified port(s).
H/H
sra show <portlist> Displays the SRA ADSL2+ setting
for the specified port(s).
M/L
pmm enable <portlist> <L2|L3> Turns on the Power Management
feature on the specified port(s).
H/H
pmm disable <portlist> Turns off the Power Management
feature on the specified port(s).
H/H
pmm show <portlist> Displays the Power Management
feature setting for the specified
port(s).
M/L
pmm set <portlist> <L0|L2> Sets the Power Management
mode
H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P