Filter
Top Products
Chapter 42 Command Examples
IES-612-51A User’s Guide
280
42.3.2 Log Clear Command
Syntax:
ras> sys log clear
This command clears the system error log.
" If you clear a log (using the log clear command), you cannot view it again.
42.3.3 Info Show Command
Syntax:
ras> sys info show
This command shows general system settings, the BIN (firmware) version, system uptime and
bootbase version.
An example is shown next.
42.4 Isolation Commands
Turn on port isolation to block communications between subscriber ports. When you enable
port isolation, you do not need to configure the VLAN to isolate subscribers.
42.4.1 Isolation Show Command
Syntax:
ras> switch isolation show
This command displays the current setting of the subscriber isolation feature.
Figure 134 Info Show Example
ras> sys info show
Hostname:
Location:
Contact:
Model: AAM1212-51
ZyNOS version: V3.52(ABA.0) | 07/07/2006
F/W size: 2747672
MAC address: 00:13:49:DE:00:AD
System up time: 0(days) : 22:31:49
Bootbase version: V1.03(AAM1212-51) | 02/18/2005
F/W build date: Jul 7 2006 10:00:31
DSP code version: 6.04.0003
Hardware version:
Serial number: