Filter
Top Products
Chapter 47 IGMP Commands
IES-612-51A User’s Guide
316
This command removes an IGMP filter profile.
The following example removes the voice IGMP filter profile.
47.3.5 IGMP Filter Profile Show Command
Syntax:
ras> switch igmpfilter profile show [<name>|*]
where
This command displays an IGMP filter profile’s settings.
The following example displays the voice IGMP filter profile’s settings.
47.4 IGMP Bandwidth Commands
Use the IGMP bandwidth commands to set up bandwidth budgets for specific multicast
channels.
47.4.1 IGMP Bandwidth Default Command
Syntax:
ras> switch igmpsnoop bandwidth default <bandwidth>
Figure 177 IGMP Filter Profile Delete Command Example
ras> switch igmpfilter profile delete voice
[<name>|*] =
The name of an IGMP filter profile or all of the IGMP filter
profiles <*>.
Figure 178 IGMP Filter Show Command Example
ras> switch igmpfilter profile show voice
profile index startip endip
-------------------------------------------------------------------------
voice 1 224.1.1.10 224.1.1.44
voice 2 0.0.0.0 0.0.0.0
voice 3 0.0.0.0 0.0.0.0
voice 4 0.0.0.0 0.0.0.0
voice 5 0.0.0.0 0.0.0.0
voice 6 0.0.0.0 0.0.0.0
voice 7 0.0.0.0 0.0.0.0
voice 8 0.0.0.0 0.0.0.0
voice 9 0.0.0.0 0.0.0.0
voice 10 0.0.0.0 0.0.0.0
voice 11 0.0.0.0 0.0.0.0
voice 12 0.0.0.0 0.0.0.0
voice 13 0.0.0.0 0.0.0.0
voice 14 0.0.0.0 0.0.0.0
voice 15 0.0.0.0 0.0.0.0
voice 16 0.0.0.0 0.0.0.0