Filter
Top Products
Chapter 56 Product Specifications
IES-612-51A User’s Guide
423
56.4 Default Settings
This section lists the default configuration of the IES-612-51A.
RFC 2516 A Method for Transmitting PPP Over Ethernet (PPPoE)
RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5.
IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
IEEE 802.11x Port Based Network Access Control.
IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service
ANSI T1.413, Issue 2 Asymmetric Digital Subscriber Line (ADSL) standard.
G dmt(G.992.1) G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceivers
ITU G.992.1 (G.DMT) ITU standard for ADSL using discrete multitone modulation.
ITU G.992.2 (G. Lite) ITU standard for ADSL using discrete multitone modulation.
ITU G.992.3 (G.dmt.bis) ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates.
ITU G.992.3 (G.lite.bis) ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates.
ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the capability of
basic ADSL by doubling the number of downstream bits.
1.363.5 Compliant AAL5 SAR (Segmentation And Re-assembly)
Table 114 Standards Supported (continued)
STANDARD DESCRIPTION
Table 115 Default Settings
Default Login Settings
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default User Name admin
Default Password 1234
ADSL Default Settings
Enable/Disable State: Enabled
Operational Mode: auto
(DSL) Port Profile Default
Settings
Name: DEFVAL (Factory Default)
Profile Status: Active
Latency Mode: Interleave
Upstream ADSL Settings: Downstream ADSL Settings:
Max Rate 512 Kbps 2048 Kbps
Min Rate 64 Kbps 64 Kbps
Latency Delay 4 ms 4 ms
Max SNR 31 db 31 db