Filter
Top Products
Chapter 42 Command Examples
IES-612-51A User’s Guide
282
where
This command displays and/or erases port statistics.
The following example displays port statistics for DSL port 1.
where
See Chapter 6 on page 75 for details on the other port statistics fields.
<portlist> =
You can specify a single port <1>, all ports <*> or a list of
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
<vpi> <vci> =
The VPI and VCI of an individual PVC.
[clear] =
Use clear to have the IES-612-51A set the specified
port(s) or PVC’s counters back to zero.
Figure 137 Statistics Port Command Example
ras> statistics port 1
[adsl port 1]
tx packets : 20
rx packets : 0
tx uni-packets : 1
rx uni-packets : 0
tx nonuni-packets : 19
rx nonuni-packets : 0
tx discard packets: 0
rx discard packets: 0
errors : 0
tx rate (bytes/s): 0
rx rate (bytes/s): 128
tx bytes : 5904
rx bytes : 0
tx uni-packets =
This field shows the number of unicast packets transmitted
on this port.
rx uni-packets =
This field shows the number of unicast packets received on
this port.
tx nonuni-
packets
=
This field shows the number of non-unicast (broadcast and
multicast) packets transmitted on this port.
rx nonuni-
packets
=
This field shows the number of non-unicast (broadcast and
multicast) packets received on this port.