Filter
Top Products
IES-612-51A User’s Guide
49
CHAPTER 3
Front Panel
This chapter describes the front panel and rear panel of the IES-612-51A and shows you how
to make the hardware connections.
3.1 Front Panel
The figure below shows the front panel of the IES-612-51A.
Figure 6 Front Panel: AC Input
3.1.1 Front Panel Ports
The following table describes the port labels on the front panel.
3.2 LEDs
The following table describes the LEDs on the front panel.
Table 1 Front Panel Ports
LABEL DESCRIPTION
CONSOLE Only connect to this port if you want to configure the IES-612-51A using the command
line interface (CLI) via the console port.
LAN 10/100 Connect these ports to a computer, a hub, an Ethernet switch or router.
USER/CO Connect the Telco-50 connector USER pins (14-25, 39-50) to subscribers respectively.
Connect the Telco-50 connector CO pins (1-12, 26-37) to the telephone company for
subscribers respectively.
Table 2 LEDs
LED COLOR STATUS DESCRIPTION
ALM Red On The IES-612-51A is functioning abnormally.
Off The IES-612-51A is functioning normally.