Filter
Top Products
IES-612-51A User’s Guide
69
CHAPTER 5
Initial Configuration
This chapter describes initial configuration for the IES-612-51A. See Chapter 56 on page 417
for various default settings of the IES-612-51A.
5.1 Initial Configuration Overview
This chapter shows what you first need to do to provide service to DSL subscribers.
5.2 Initial Configuration
This chapter uses the web configurator for initial configuration. See the CLI chapters for
information on the commands. Use Internet Explorer 6 and later versions with JavaScript
enabled.
1 Log in to the web configurator. See Section 4.3 on page 61 for instructions.
2 In the navigation panel, click Basic Setting, IP Setup. The IP Setup screen appears.
Figure 20 IP Setup
3 Use this screen to change the IP address, subnet mask, and default gateway IP address
for your network. Apply the settings.