ZyXEL Communications IES-612-51A Modem User Manual


 
IES-612-51A User’s Guide
341
CHAPTER 51
SNMP Commands
This chapter covers Simple Network Management Protocol (SNMP) with the IES-612-51A.
51.1 SNMP Commands
Use these commands to configure SNMP settings. See Chapter 34 on page 225 for more
information about SNMP.
51.1.1 Get Community Command
Syntax:
ras> sys snmp getcommunity <community>
where
Enter this command with the community to set the password.
51.1.2 Set Community Command
Syntax:
ras> sys snmp setcommunity <community>
where
Enter this command with the community to set the password.
51.1.3 Trusted Host Set Command
Syntax:
ras> sys snmp trusthost <ip>
<community> =
The password for the incoming Get- and GetNext-
requests from the management station.
<community> =
The password for the incoming Set- requests from the
management station.