Filter
Top Products
Chapter 45 IEEE 802.1Q Tagged VLAN Commands
IES-612-51A User’s Guide
300
45.4 IEEE VLAN1Q Tagged VLAN Configuration Commands
These switch commands allow you to configure and monitor the IEEE 802.1Q Tagged VLAN.
45.4.1 VLAN Port Show Command
Syntax:
ras> switch vlan portshow [portlist]
where
This command displays the port’s IEEE 802.1Q VLAN tag settings.
The following example shows the settings for DSL port 1.
45.4.2 VLAN PVID Command
Syntax:
ras> switch vlan pvid <portlist> <pvid>
where
This command sets a default VLAN ID for all untagged packets that come in through the
specified port.
The following example sets the default VID of port 1 to 200.
45.4.3 VLAN Priority Command
Syntax:
ras> switch vlan priority <portlist> <priority>
[portlist] =
You can specify a single port <1>, all ports <*> or a list of
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
Figure 150 VLAN Port Show Command Example
ras> switch vlan portshow 3
port pvid priority frametype
----- ---- -------- ---------
3 1 0 all
<portlist> =
You can specify a single port <1>, all ports <*> or a list of
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
<pvid> =
The VLAN ID. Valid parameter range = [1 – 4094].
Figure 151 VLAN PVID Command Example
ras> switch vlan pvid 1 200