Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.21
To remove a bgp cluster-id apply the example commands as shown below:
Related Commands bgp client-to-client reflection (BGP and BGP4+)
neighbor route-reflector-client (BGP)
show bgp ipv6 (BGP4+)
show ip bgp (BGP)
bgp confederation identifier (BGP and BGP4+)
This command specifies a BGP confederation identifier.
The no variant of this command removes all BGP confederation identifiers.
Syntax bgp confederation identifier <1-4294967295>
no bgp confederation identifier
Mode Router Configuration
Examples
Related Commands
bgp confederation peers (BGP and BGP4+)
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
no bgp cluster-id 10.10.1.1
Parameter Description
<1-4294967295> Set routing domain confederation AS number.
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
bgp confederation identifier 1
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
no bgp confederation identifier