Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.145
To create a peer-group use the neighbor port (BGP and BGP4+) command on page
3.147 and then use this command to add neighbors to the group.
Examples [BGP] This example shows a new peer-group group1 and the addition of a neighbor
10.10.0.63 to the group.
This example shows a new peer-group group1 and the removal of a neighbor
10.10.0.63 to the group.
Examples [BGP4+] This example shows a new peer-group group1 and the addition of a neighbor
2001:0db8:010d::1 to the group.
This example shows a new peer-group group1 and the removal of a neighbor
2001:0db8:010d::1 to the group.
Related Commands neighbor peer-group (create a peer-group) (BGP and BGP4+)
neighbor port (BGP and BGP4+)
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 10.10.0.63 peer-group group1
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
no neighbor 10.10.0.63 peer-group group1
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
neighbor 2001:0db8:010d::1
peer-group group1
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
no neighbor 2001:0db8:010d::1
peer-group group1