Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.84 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
Examples [BGP4+] To enable an exchange of routes in IPv6 Address Family Configuration mode with a
neighboring router with the IPv6 address 2001:0db8:010d::1, enter the commands
as shown below:
To disable an exchange of routes in IPv6 Address Family Configuration mode with a
neighboring router with the IPv6 address 2001:0db8:010d::1, enter the commands
as shown below:
To enable an exchange of routes with a neighboring router with the peer-group named
group1, enter the commands as shown below:
To disable an exchange of routes with a neighboring router with the peer-group named
group1, enter the commands as shown below:
Related Commands neighbor peer-group (add a neighbor) (BGP and BGP+)
neighbor route-map (BGP and BGP4+)
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
neighbor 2001:0db8:010d::1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
no neighbor 2001:0db8:010d::1
activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 2001:0db8:010d::1 remote-as
10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
neighbor 2001:0db8:010d::1
peer-group group1
awplus(config-router-af)#
neighbor group1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
no neighbor group1 activate