Filter
Top Products
BGP and BGP4+ Configuration
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 2.13
Configuring BGP Graceful Reset
The graceful restart feature for BGP session reset is used so that any changes in network
configuration do not affect packet forwarding. The bgp graceful-restart graceful-reset
(BGP and BGP4+) command on page 3.33 invokes graceful restart only when a
configuration change forces a peer reset.
This example shows configuring BGP graceful reset.
Peer 1
bgp_7
Peer 1
1.1.1.1
Peer 2
1.1.1.2
AS100 AS200
awplus(config)#
configure terminal
Enter the Global Configuration mode.
awplus(config-router)#
router bgp 100
Define the BGP routing process. The number 100
specifies the AS number of Peer 1.
awplus(config-router)#
bgp graceful-restart
Enable BGP graceful restart support.
awplus(config-router)#
bgp graceful-restart graceful-reset
Configure to invoke graceful restart when a configuration
change forces a peer reset.
awplus(config-router)#
neighbor 1.1.1.2 remote-as 200
Specify the neighbor’s IP address (1.1.1.2) and the AS
number of the neighbor (200).
awplus(config-router)#
neighbor 1.1.1.2 capability
graceful-restart
Specify the neighbor’s IP address (1.1.1.2) for which the
graceful restart capability is supported.