Filter
Top Products
BGP and BGP4+ Introduction
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 1.29
BGP and BGP4+ monitoring
You can remove all contents of a particular cache, table, or database. You also can display
specific statistics. The following sections describe each of these tasks.
How to clear BGP and BGP4+ tables
You can remove all contents of a particular table. Clearing a table may be needed when
the contents of the table have become invalid. To clear tables for BGP and BGP4+, use the
following commands in Privileged Exec mode, as needed:
This command resets all BGP IPv4 connections by clearing all BGP peers:
This command resets all BGP IPv4 and BGP4+ IPv6 connections by clearing all BGP and
BGP4+ peers:
These commands remove all members of a BGP or BGP4+ peer group respectively:
awplus#
clear ip bgp <ipv4-addr>
[in [prefix-filter]|out|soft
[in|out]]
This command resets a specified BGP IPv4 connection.
awplus#
clear ip bgp *
This command resets all BGP IPv4 connections.
awplus#
clear bgp *
This command resets all BGP IPv4 and BGP4+ IPv6 connections.
awplus#
clear bgp peer-group
<peer-group>
[in [prefix-filter]|out|soft
[in|out]]
This command removes all members of a BGP peer group.
awplus#
clear ip bgp peer-group <peer-
name>
This command removes all members of a BGP peer group.
awplus#
clear bgp ipv6 peer-group
<peer-name>
This command removes all members of a BGP4+ peer group.