Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.236 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show ip bgp neighbors notification (BGP)
Use this command to display the number of notification messages sent to the neighbor
from the peer throughout the session.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors {<ipv4-addr>|<ipv6-addr>} notification
Mode User Exec and Privileged Exec
Example
show ip bgp neighbors open (BGP)
Use this command to display the number of open messages sent to the neighbor from the
peer throughout the session.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors <ipv4-addr> open
Mode User Exec and Privileged Exec
Example
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 notification
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 open