Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.186 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
Examples [BGP] To source BGP connections for neighbor 10.10.0.72 with the IP address of the local
loopback address instead of the best local address, enter the commands listed below:
To remove BGP connections for neighbor 10.10.0.72 with the IP address of the local
loopback address instead of the best local address, enter the commands listed below:
To source BGP connections for neighbor group1 with the IP address of the local
loopback address instead of the best local address, enter the commands listed below:
To remove BGP connections for neighbor group1 with the IP address of the local
loopback address instead of the best local address, enter the commands listed below:
awplus(config)#
interface lo
awplus(config-if)#
ip address 10.10.0.73/24
awplus(config-if)#
exit
awplus(config)#
router bgp 100
awplus(config-router)#
network 10.10.0.0
awplus(config-router)#
neighbor 10.10.0.72 remote-as 110
awplus(config-router)#
neighbor 10.10.0.72 update-source lo
awplus(config)#
router bgp 100
awplus(config-router)#
no neighbor 10.10.0.72 update-source
awplus(config)#
interface lo
awplus(config-if)#
ip address 10.10.0.73/24
awplus(config-if)#
exit
awplus(config)#
router bgp 100
awplus(config-router)#
network 10.10.0.0
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 10.10.0.72 remote-as 100
awplus(config-router)#
neighbor 10.10.0.72 peer-group group1
awplus(config-router)#
neighbor group1 update-source lo
awplus(config)#
router bgp 100
awplus(config-router)#
neighbor group1 update-source lo