Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.233
show bgp ip neighbors connection information:
■ Connection counters
■ Graceful restart timer
■ Hop count to the peer
■ Next hop information
■ Local and external port numbers
Examples [BGP]
Output
Figure 3-14: Example output from the show ip bgp neighbors 10.10.10.72 command
Related Commands show bgp ipv6 neighbors (BGP4+)
awplus#
show ip bgp neighbors 10.10.10.72 advertised-routes
awplus#
show ip bgp neighbors 10.10.10.72 received
prefix-filter
awplus#
show ip bgp neighbors 10.10.10.72 received-routes
awplus#
show ip bgp neighbors 10.10.10.72 routes
awplus#show ip bgp neighbors 10.10.10.72
BGP neighbor is 10.10.10.72, remote AS 100, local AS 100, internal
link
Member of peer-group group1 for session parameters
BGP version 4, remote router ID 0.0.0.0
BGP state = Active
Last read , hold time is 90, keepalive interval is 30 seconds
Received 0 messages, 0 notifications, 0 in queue
Sent 0 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP table version 1, neighbor version 0
Index 1, Offset 0, Mask 0x2
group1 peer-group member
NEXT_HOP is always this router
0 accepted prefixes
0 announced prefixes
Connections established 0; dropped 0
Next connect timer due in 33 seconds