Filter
Top Products
BGP and BGP4+ Configuration
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 2.25
Names of Commands Used
address-family (BGP and BGP4+)
bgp router-id (BGP and BGP4+)
exit-address-family (BGP and BGP4+)
neighbor remote-as (BGP and BGP4+)
router bgp (BGP and BGP4+)
Validation Commands
show bgp ipv6 (BGP4+)
show bgp ipv6 neighbors (BGP4+)
show bgp ipv6 summary (BGP4+)
awplus(config-router#
neighbor 2001:db8::10 remote-as 200
Define BGP4+ neighbor Router 1, and establish a TCP
session by specifying the global IPv6 address
(2001:db8::10) and the AS number (200) of neighbor
Router 1.
awplus(config-router)#
address-family ipv6
Enter IPv6 Address Family Configuration mode for
configuring routing sessions that use IPv6 address
prefixes.
awplus(config-router-af)#
neighbor 2001:db8::10 activate
Activate the exchange of information to the peer
(neighbor) Router 1 (2001:db8::10) and enable the
exchange of IPv6 address prefix types with this neighbor.
Note that other information apart from prefixes is sent in
updates. This command activates the exchange of
information for the peer defined.
awplus(config-router-af)#
exit-address-family
Exit IPv6 Address Family Configuration mode, and return
to the Router Configuration mode.
awplus(config-router)#
exit
Exit the Router Configuration mode, and return to the
Global Configuration mode.