Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.211
show bgp ipv6 neighbors (BGP4+)
Use this command to display detailed information on peering connections to all BGP4+
neighbors within an IPv6 environment. Use the show ip bgp neighbors (BGP) to display
detailed information on peering connections to all BGP neighbors within an IPv4
environment. See the
Usage section about what you can verify using this command.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show bgp ipv6 neighbors [<ipv6-addr> [advertised-routes|received
prefix-filter|received-routes|routes]]
Mode
User Exec and Privileged Exec
Usage You can verify many of the BGP4+ settings using this command:
■ show bgp ipv6 neighbors session information:
■ show bgp ipv6 neighbors IPv6 unicast address family information:
■ show bgp ipv6 neighbors connection information:
Parameter Description
<ipv6-addr> Specifies the IPv6 address, entered in hexadecimal in the
format X:X::X:X.
advertised-routes Displays the routes advertised to a BGP4+ neighbor.
received prefix-
filter
Displays received prefix-list filters.
received-routes Displays the received routes from the neighbor. To display
all the received routes from the neighbor, configure the
BGP4+ soft reconfigure first.
routes Displays all accepted routes learned from neighbors.