Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.187
Examples [BGP4+] To source BGP connections for neighbor 2001:0db8:010d::1 with the IPv6 address of
the local loopback address instead of the best local address, enter the commands listed
below:
To remove BGP connections for neighbor 2001:0db8:010d::1 with the IPv6 address
of the local loopback address instead of the best local address, enter the commands listed
below:
To source BGP connections for neighbor group1 with the IPv6 address of the local
loopback address instead of the best local address, enter the commands listed below:
To remove BGP connections for neighbor group1 with the IPv6 address of the local
loopback address instead of the best local address, enter the commands listed below:
Related Commands neighbor peer-group (add a neighbor) (BGP and BGP+)
neighbor route-map (BGP and BGP4+)
awplus(config)#
interface lo
awplus(config-if)#
ipv6 address 2001:0db8:010d::1/128
awplus(config-if)#
exit
awplus(config)#
router bgp 100
awplus(config-router)#
neighbor 2001:0db8:010d::1 remote-as
110
awplus(config-router)#
neighbor 2001:0db8:010d::1
update-source lo
awplus(config)#
router bgp 100
awplus(config-router)#
no neighbor 2001:0db8:010d::1
update-source
awplus(config)#
interface lo
awplus(config-if)#
ipv6 address 2001:0db8:010d::1/128
awplus(config-if)#
exit
awplus(config)#
router bgp 100
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 2001:0db8:010d::1 remote-as
100
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
neighbor 2001:0db8:010d::1 peer-group
group1
awplus(config-router-af)#
exit
awplus(config-router)#
neighbor group1 update-source lo
awplus(config)#
router bgp 100
awplus(config-router)#
neighbor group1 update-source lo