Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.231
show ip bgp neighbors (BGP)
Use this command to display detailed information on peering connections to all BGP
neighbors within an IPv4 environment. Use the show bgp ipv6 neighbors (BGP4+) to
display detailed information on peering connections to all BGP4+ neighbors within an
IPv6 environment. See the
Usage section about what you can verify using this command.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax [BGP] show ip bgp neighbors [<ipv4-addr> [advertised-routes|
received prefix-filter|received-routes|routes]]
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] neighbors [<ipv4-addr> routes]
Mode [BGP] User Exec and Privileged Exec
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
advertised-routes Displays the routes advertised to a BGP neighbor.
received prefix-
filter
Displays the received prefix-list filters.
received-routes Displays the received routes from the neighbor. To display
all the received routes from the neighbor, configure the BGP
soft reconfigure first.
routes Displays all accepted routes learned from neighbors.
global
When VRF-Lite is configured, apply the command to the
global routing and forwarding table.
vrf
Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.