Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.238 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show ip bgp neighbors update (BGP)
Use this command to display the number of update messages sent to the neighbor from
the peer throughout the session.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors <ipv4-addr> update
Mode User Exec and Privileged Exec
Example
show ip bgp paths (BGP)
Use this command to display BGP4 path information within an IPv4 environment. Use the
show bgp ipv6 paths (BGP4+) command to display BGP4+ path information within an
IPv4 environment.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp paths
Mode
User Exec and Privileged Exec
Example
Related Commands
show bgp ipv6 paths (BGP4+)
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 update
awplus#
show ip bgp paths