Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.235
show ip bgp neighbors keepalive (BGP)
Use this command to display the number of keepalive messages sent to the neighbor
from the peer throughout the session.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors <ipv4-addr> keepalive
Mode User Exec and Privileged Exec
Examples
Related Commands
show ip bgp neighbors keepalive-interval (BGP)
show ip bgp neighbors keepalive-interval (BGP)
Use this command to display the configured keepalive-interval value of the peer at the
session establishment time with the neighbor.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors {<ipv4-addr>|<ipv6-addr>} keepalive-interval
Default The keepalive timer default is 60 seconds as per RFC 4271. Keepalive is holdtime / 3.
Mode User Exec and Privileged Exec
Examples
Related Commands
neighbor timers (BGP and BGP4+)
show ip bgp neighbors hold-time (BGP)
timers (BGP and BGP4+)
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 keepalive
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 keepalive-interval