Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.217
show bgp ipv6 route-map (BGP4+)
Use this command to display BGP4+ routes that match the specified route-map within an
IPv6 environment. Use the show ip bgp route-map (BGP) command to display BGP
routes that match the specified route-map within an IPv4 environment.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show bgp ipv6 route-map <route-map>
Mode
User Exec and Privileged Exec
Example To show routes that match the route-map myRouteMap, use the command:
Related Commands show ip bgp route-map (BGP)
show bgp ipv6 summary (BGP4+)
Use this command to display a summary of a BGP4+ neighbor status within an IPv6
environment. Use the show ip bgp summary (BGP) command to display a summary of a
BGP neighbor status within an IPv4 environment.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show bgp ipv6 summary
Mode
User Exec and Privileged Exec
Example
Related Commands
show ip bgp summary (BGP)
Parameter Description
<route-map> Specifies a route-map that is matched.
awplus#
show bgp ipv6 route-map myRouteMap
awplus#
show bgp ipv6 summary