Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.210 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show bgp ipv6 longer-prefixes (BGP4+)
Use this command to display the route of the local BGP4+ routing table for a specific prefix
with a specific mask or for any prefix having a longer mask than the one specified.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show bgp ipv6 <ipv6-addr/prefix-length> longer-prefixes
Mode
User Exec and Privileged Exec
Example
Related Commands
show bgp ipv6 (BGP4+)
Parameter Description
<ipv6-addr/
prefix-length>
Specifies the IPv6 address with prefix length. The IPv6
address uses the format X:X::X:X/Prefix-Length. The prefix-
length is usually set between 0 and 64.
awplus#
show bgp ipv6 2001:0db8::/64 longer-prefixes