Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.234 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show ip bgp neighbors connection-retrytime (BGP)
Use this command to display the configured connection-retrytime value of the peer at the
session establishment time with the neighbor.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors <ipv4-addr>
connection-retrytime
Mode
User Exec and Privileged Exec
Example
show ip bgp neighbors hold-time (BGP)
Use this command to display the configured holdtime value of the peer at the session
establishment time with the neighbor.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp neighbors <ipv4-addr> hold-time
Default The holdtime timer default is 90 seconds as per RFC 4271. Holdtime is keepalive * 3.
Mode User Exec and Privileged Exec
Examples
Related Commands
neighbor timers (BGP and BGP4+)
show ip bgp neighbors keepalive-interval (BGP)
timers (BGP and BGP4+)
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 connection-retrytime
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
awplus#
show ip bgp neighbors 10.11.4.26 hold-time