Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.47
clear bgp (ASN) (BGP and BGP4+)
Use this command to reset the BGP and BGP4+ connections for peers in the specified
Autonomous System Number (ASN).
Syntax [BGP/BGP4+] clear bgp <asn> [in [prefix-filter]|out|soft [in|out]]
Mode [BGP/BGP4+]
Privileged Exec
Examples
[BGP/BGP4+]
Parameter Description
<asn> <1-4294967295>
The AS Number for which all routes will be cleared.
in Indicates that incoming advertised routes will be cleared.
prefix-filter Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out Indicates that outgoing advertised routes will be cleared.
soft in Soft inbound reset causes the neighbors to resend all their
updates to the local switch, without resetting the connection or
clearing the entries in the local switch. So, the local switch stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out Soft outbound reset causes the switch to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
awplus#
clear bgp 300 soft in prefix-filter
awplus#
clear bgp 500 soft out
awplus#
clear bgp 300 soft in
awplus#
clear bgp 1 in prefix-filter