Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.83
To disable an exchange of routes with a neighboring router with the IPv4 address
10.10.10.1, enter the commands as shown below:
To enable an exchange of routes in Address Family Configuration mode with a
neighboring router with the IPv4 address 10.10.10.1, enter the commands as shown
below:
To disable an exchange of routes in Address Family Configuration mode with a
neighboring router with the IPv4 address 10.10.10.1, enter the commands as shown
below:
To enable an exchange of routes with a neighboring router with the peer-group named
group1, enter the commands as shown below:
To disable an exchange of routes with a neighboring router with the peer-group named
group1, enter the commands as shown below:
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
no neighbor 10.10.10.1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv4
awplus(config-router-af)#
neighbor 10.10.10.1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv4
awplus(config-router-af)#
no neighbor 10.10.10.1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 10.10.0.63 remote-as 10
awplus(config-router)#
neighbor 10.10.0.63 peer-group group1
awplus(config-router)#
neighbor group1 activate
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
no neighbor group1 activate