Filter
Top Products
BGP and BGP4+ Configuration
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
2.38 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
Names of Commands Used
address-family (BGP and BGP4+)
bgp graceful-restart (BGP and BGP4+)
bgp graceful-restart graceful-reset (BGP and BGP4+)
bgp update-delay (BGP and BGP4+)
exit-address-family (BGP and BGP4+)
neighbor capability graceful-restart (BGP and BGP4+)
neighbor remote-as (BGP and BGP4+)
router bgp (BGP and BGP4+)
Validation Commands
show bgp ipv6 (BGP4+)
show bgp ipv6 neighbors (BGP4+)
show bgp ipv6 summary (BGP4+)
awplus(config-router)#
address-family ipv6 unicast
Exchange the IPv6 capabilities, and move from Router
Configuration mode to IPv6 Address Family Configuration
mode.
awplus(config-router-af)#
neighbor 2001:db8::10:10 activate
Activate the exchange of information to the peer
(neighbor) with the global unicast IPv6 address
(2001:db8::10:10) (Router 1). Note that other
information apart from prefixes is sent in updates. This
command activates the exchange of information for the
peer defined.
awplus(config-router-af)#
neighbor 2001:db8::10:10 capability
graceful-restart
Specify the neighbor’s global unicast IPv6 address
(2001:db8::10:10), for which the graceful restart
capability function is supported. This command
advertises the graceful restart capability to the peer.
awplus(config-router-af)#
exit-address-family
Exit IPv6 Address Family Configuration mode, and return
to the Router Configuration mode.
awplus(config-router)#
exit
Exit the Router Configuration mode, and return to the
Global Configuration mode.