Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.239
show ip bgp prefix-list (BGP)
Use this command to display routes matching the prefix-list within an IPv4 environment.
Use the show bgp ipv6 prefix-list (BGP4+) command to display routes matching the
prefix-list within an IPv6 environment.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp prefix-list <list>
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] prefix-list <list>
Mode
User Exec and Privileged Exec
Examples
Related Commands
show bgp ipv6 prefix-list (BGP4+)
Parameter Description
global
When VRF-Lite is configured, apply the command to the global routing
and forwarding table.
vrf
Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.
<list> Specifies the name of the IP prefix list.
awplus#
show ip bgp prefix-list mylist
awplus#
show ip bgp vrf red prefix-list myPrefixes