Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.77
Example In the below sample configuration, the last ip prefix-list command in the below
list matches all, and the first ip prefix-list command denies the IP network
76.2.2.0:
.
To deny the IP addresses between 10.0.0.0/14 (10.0.0.0 255.252.0.0) and
10.0.0.0/22 (10.0.0.0 255.255.252.0) within the 10.0.0.0/8 (10.0.0.0
255.0.0.0) addressing range, enter the following commands:.
Related Commands ipv6 prefix-list (IPv6 Prefix List)
show ip prefix-list (IPv4 Prefix List)
awplus(config)#
router bgp 100
awplus(config-router)#
network 172.1.1.0
awplus(config-router)#
network 172.1.2.0
awplus(config-router)#
neighbor 10.6.5.3 remote-as 300
awplus(config-router)#
neighbor 10.6.5.3 prefix-list mylist out
awplus(config-router)#
exit
awplus(config)#
ip prefix-list mylist seq 5 deny
76.2.2.0/24
awplus(config)#
ip prefix-list mylist seq 100 permit any
awplus#
configure terminal
awplus(config)#
ip prefix-list mylist seq 12345 deny 10.0.0.0/
8 ge 14 le 22