Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.37
bgp nexthop-trigger-count (BGP and BGP4+)
Use this command to configure the display of BGP nexthop-tracking status.
Use the no variant of this command to disable this function.
Syntax [BGP/BGP4+] bgp nexthop-trigger-count <0-127>
no bgp nexthop-trigger-count
Mode [BGP/BGP4+]
Router Configuration
Example
[BGP/BGP4+]
To enable nexthop-tracking status on the BGP peer belonging to the Autonomous System
(AS) 100, enter the following commands:
To disable nexthop-tracking status, enter the following commands:
Related Commands bgp nexthop-trigger delay (BGP and BGP4+)
bgp nexthop-trigger enable (BGP and BGP4+)
show bgp nexthop-tracking (BGP)
Parameter Description
<0-127> BGP nexthop-tracking status.
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
bgp nexthop-trigger-count 10
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
no bgp nexthop-trigger-count