Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 3.163
The following example shows the configuration of the route-map name rmap2 and then
the use of this map name in the neighbor route-map command for the neighbor with the
peer group named group1 in the Router Configuration mode.
The following example shows the removal the route-map name rmap2 in the neighbor
route-map command for the neighbor with the peer group named group1 in the Router
Configuration mode.
Related Commands address-family (BGP and BGP4+)
neighbor peer-group (add a neighbor) (BGP and BGP+)
route-map (Route Map)
awplus#
configure terminal
awplus(config)#
route-map rmap2 permit 6
awplus(config-route-map)#
match origin incomplete
awplus(config-route-map)#
set metric 100
awplus(config-route-map)#
exit
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor group1 peer-group
awplus(config-router)#
neighbor 2001:0db8:010d::1 remote-as
10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
neighbor 2001:0db8:010d::1 peer-group
group1
awplus(config-router-af)#
neighbor group1 route-map rmap2 in
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
address-family ipv6
awplus(config-router-af)#
no neighbor group1 route-map rmap2 in