Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.128 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
neighbor interface (BGP4+)
Use this command to configure the interface name of a BGP4+ speaking neighbor.
Use the no variant of this command to disable this function.
Syntax [BGP4+] neighbor {<ipv6-addr>|<ipaddress>} interface <interface>
no neighbor {<ipv6-addr>|<ipaddress>} interface <interface>
Mode [BGP4+]
Router Configuration
Usage [BGP4+] This command is for use with BGP4+ peering. Use this command for BGP peering with
IPv6 link local addresses.
Examples [BGP4+]
Parameter Description
<ipaddress> Specifies the IPv4 address of the BGP neighbor - entered in dotted
decimal notation in the format A.B.C.D.
<ipv6-addr> Specifies the IPv6 address of the BGP4+ neighbor, entered in
hexadecimal in the format X:X::X:X.
<interface> Specifies the interface name of BGP neighbor, e.g. vlan2.
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor 10.10.0.72 interface vlan2
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
no neighbor 10.10.0.72 interface vlan2
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
neighbor 2001:0db8:010d::1 interface
vlan2
awplus#
configure terminal
awplus(config)#
router bgp 10
awplus(config-router)#
no neighbor 2001:0db8:010d::1
interface vlan2