Filter
Top Products
BGP and BGP4+ Configuration
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
2.42 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
Router 3
Names of Commands Used
address-family (BGP and BGP4+)
aggregate-address (BGP and BGP4+)
exit-address-family (BGP and BGP4+)
network (BGP and BGP4+)
neighbor activate (BGP and BGP4+)
neighbor remote-as (BGP and BGP4+)
router bgp (BGP and BGP4+)
Validation Commands
show bgp ipv6 (BGP4+)
show bgp ipv6 neighbors (BGP4+)
show bgp ipv6 summary (BGP4+)
awplus(config)#
configure terminal
Enter the Global Configuration mode.
awplus(config-router)#
router bgp 200
Define the BGP4+ routing process. The number 100
specifies the AS number of Router 3.
awplus(config-router)#
network 2001:db8:99::/64
Specify the network 2001:db8:99::/64 to be
advertised by the BGP4+ routing process from Router 3
to Router 2.
awplus(config-router)#
neighbor 2001:db8::114 remote-as
100
Specify the neighbor’s global unicast IPv6 address
(2001:db8::114) (and Autonomous System (AS)
number (100). Router 2 is a neighbor of Router 3. This
command defines BGP4+ neighbor Router 2, and
establishes a TCP session by specifying the global unicast
IPv6 address and the AS number of the neighbor.
awplus(config-router)#
address-family ipv6 unicast
Enter the IPv6 Address Family Configuration mode from
the Global Configuration mode.
awplus(config-router-af)#
neighbor 2001:db8::114 activate
Activate the exchange of information to the peer
(neighbor) with the global unicast IPv6 address
2001:db::114 for Router 2. Note that other
information apart from prefixes is sent in updates. This
command activates the exchange of information for the
peer defined.
awplus(config-router-af)#
exit-address-family
Exit IPv6 Address Family Configuration mode, and return
to the Router Configuration mode.
awplus(config-router)#
exit
Exit the Router Configuration mode, and return to the
Global Configuration mode.