Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.222 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show ip bgp cidr-only (BGP)
Use this command to display routes with non-natural network masks.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp cidr-only
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] cidr-only
Mode User Exec and Privileged Exec
Example
Output
Figure 3-10: Example output from the show ip bgp cidr-only command
Parameter Description
global
When VRF-Lite is configured, apply the command to the global routing
and forwarding table.
vrf
Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.
awplus#
show ip bgp cidr-only
awplus#
show ip bgp vrf red cidr-only
BGP table version is 0, local router ID is 10.10.10.50
Status codes: s suppressed, d damped, h history, p stale, *
valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight
Path
*> 3.3.3.0/24 10.10.10.10 0 11
i
*> 6.6.6.0/24 0.0.0.0 32768 i
Total number of prefixes 2