Filter
Top Products
BGP and BGP4+ Configuration
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 2.41
awplus(config-router-af)#
aggregate-address 2001:db8::102/64
summary-only
Configure an IPv6 non-AS-set aggregate route on Router
2. Note that the local distance gets applied to this route.
awplus(config-router-af)#
neighbor 2001:db8::121 activate
Activate the exchange of information to the peer
(neighbor) with the global unicast IPv6 address
2001:db::121 for Router 1. Note that other
information apart from prefixes is sent in updates. This
command activates the exchange of information for the
peer defined.
awplus(config-router-af)#
neighbor 2001:db8::115 activate
Activate the exchange of information to the peer
(neighbor) with the global unicast IPv6 address
2001:db8::115 for Router 3. Note that other
information apart from prefixes is sent in updates. This
command activates the exchange of information for the
peer defined.
awplus(config-router-af)#
distance 12 13 11
Configure the administrative distance for external,
internal, and local routes received in IPv6 Address Family
Configuration mode.
awplus(config-router-af)#
exit-address-family
Exit IPv6 Address Family Configuration mode, and return
to the Router Configuration mode.
awplus(config-router)#
exit
Exit the Router Configuration mode, and return to the
Global Configuration mode.