Filter
Top Products
Maintenance
124 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
x. Enter the following commands:
setenv auto-boot? false
reset-all
The system reboots to the ok prompt.
xi. To verify that the system recognizes all the disk devices, including the newly
installed ones, enter the following commands:
probe-scsi-all
reset-all
probe-ide
A message that shows the recognized disk drives is displayed. The devices that
are listed depends on the number of disk drives that are installed in the system.
Check to make certain that all of the disk drives are listed.
xii. Enter the following commands:
!
CAUTION:
CAUTION: If you fail to enter these commands, any reboots that you do in the future will
stop at the boot prompt instead of proceeding through the normal boot-up
process.
setenv auto-boot? true
boot -r
The system reboots and the login window is displayed.
xiii. Log in as root.
xiv. Enter the following commands to set the path variables:
PATH=$PATH:/usr/opt/SUNWmd/sbin:/olds
export PATH