Maintaining PCI cards
Issue 3.3 February 2003 69
8. Remove the UltraSCSI card. It should be located in PCI slot 2.
9. Install the SunSwift card in PCI slot 2 (or wherever the UltraSCSI card was installed).
10. Reconfigure the SCSI devices in the order shown in the following figure.
PCI card
Screw
PCI slot 1
PCI slot 3
PCI slot 2
u5_pcicard.cdr
PC riser
board
SCSI
Connector
UniPack Disk
Drive 1
(optional)
UniPack Disk
Drive 2
(optional)
UniPack Disk
Drive 3
(optional)
UniPack Disk
Drive 4
(optional)
UniPack
Tape Drive 1
(required)
UniPack
Tape Drive 2
(optional)
W
W
W
WW W
W
A
W
W
W
68-68 68-68
68-68
68-68
68-68
W = 68-68 pin SCSI cable
A = Auto-terminated
W
68-68
W
scsicble_swift.cdr