Avaya 585-215-871 Network Hardware User Manual


 
Factory hardware installation
200 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
4. Connect the power cable to the secondary internal disk drive.
5. Install the mounting bracket for the secondary internal disk drive to the frame of the
chassis, slipping the three holes in the mounting bracket over the three screws in the
chassis frame.
6. Slide the mounting bracket forward as far as possible.
7. Tighten the three screws.
8. Route the cables to provide clearance.
Closing the computer
To close the computer:
1. If you removed the PCI card from Slot 2 earlier, reinstall it now.
2. Reconnect the AC power cord to the computer.
3. Detach the ESD wrist strap.
4. Replace the cover on the computer. Slide the cover forward until it fits snugly around
the chassis.
5. Replace the two cover screws.
Tip:
Tip : Install each screw with just a few turns before you tighten both screws.