Avaya 585-215-871 Network Hardware User Manual


 
Troubleshooting
188 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
5. Enter:
tail -f aom_log
This displays the AOM log file.
6. If you change an AOM parameter, such as the product ID or the telephone number,
you must turn AOM off and back on again to recognize the new parameters. These
parameters are in /opt/cc/aot/data/admin/sysSetup.cfg file. Be sure to set
the port to value 1 for ttya.
7. If the /opt/cc/aom/data/log file has the message “aom cms alarm is
disabled”, enter:
export PRODUCT_TYPE=TEST
This enables the alarm.