Identifying installed PCI cards
Issue 3.3 February 2003 49
Identifying installed PCI cards
If there are problems with the PCI cards, do the following to troubleshoot the problem. If all
PCI cards are operational, you can skip this section.
At the command prompt, enter:
/usr/platform/‘uname -m‘/sbin/prtdiag -v | pg
In the section called IO Cards, there is a listing of the PCI cards. The following are
examples of some of the entries you may see. The display you see depends on your
specific configuration.
In this example:
● Slot 1 is an SAI/P card
● Slot 2 is a SunSwift card
● Slot 3 is an HSI/P card
.
.
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-B
0 PCI-1 33 3 ide-pci1095,646
0 PCI-2 33 1 pci114f,1c-pci114f,1c
0 PCI-2 33 2 pci-pci1011,24
0 PCI-2 33 3 pci1214,334-pci1214,334
.
.