Filter
Top Products
Factory hardware installation
204 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
7. Repeat this procedure for each DIMM.
8. Replace the diskette/disk drive bracket and tighten the screws that hold the bracket.
Closing the computer
To close the computer:
1. If you removed the PCI card from Slot 2 earlier, reinstall it now.
2. Reconnect the AC power cord to the computer.
3. Detach the ESD wrist strap.
4. Replace the cover on the computer. Slide the cover forward until it fits snugly around
the chassis.
5. Replace the two cover screws.
Tip:
Tip : Install each screw with just a few turns before you tighten both screws.