Replacing the CD-ROM drive
Issue 3.3 February 2003 133
Tip:
Tip : Install each screw with just a few turns before you tighten all four screws.
11. Reconnect the following cables to the back of the CD-ROM drive:
● Audio cable
● CD-ROM data ribbon cable
● Power cable.
12. Reinstall the diskette drive or hard drive that you moved earlier. Tighten the three
screws that secure the drive bracket.
Closing the computer
To close the computer:
1. If you removed the PCI card from Slot 2 earlier, reinstall it now.
2. Reconnect the AC power cord to the computer.
3. Detach the ESD wrist strap.
4. Replace the cover on the computer. Slide the cover forward until it fits snugly around
the chassis.
5. Replace the two cover screws.
Tip:
Tip : Install each screw with just a few turns before you tighten both screws.