Installation
54 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
7. Press the Right Arrow five times to display “9600.”
8. Press F2 to select “9600.”
Setting the handshake options
1. Press F1 for “Nxt.”
“Asyn #Data Bits (8)” is displayed.
2. Press F1 for “Nxt.”
“Asyn Parity Bit (None)” is displayed.
3. Press F1 for “Nxt.”
“Asyn #Stop Bits (1)” is displayed.
4. Press F1 for “Nxt.”
“DTR Action (Ignore)” is displayed.
5. Press F1 for “Nxt.”
“DSR Control (Forced_On)” is displayed.
6. Press F1 for “Nxt.”
“RTS Action (Ignore)” is displayed.
7. Press F1 for “Nxt.”
“CTS Control (WinkWhenDisc)” is displayed.
8. Press F1 for “Nxt.”
“RTS/CTS Delay (0 msec)” is displayed.
9. Press F1 for “Nxt.”
“LSD Control (WinkWhenDisc)” is displayed.
10. Press F1 for “Nxt.”
“CT111_Rate Cntl (Disable)” is displayed.
11. Press F1 for “Nxt.”
“DTE_Rate=VF (Disable)” is displayed.
12. Press F1 for “Nxt.”
“Extend Main Ch. (Disable)” is displayed.
13. Press F1 for “End.”
“Edit StrapGroup” is displayed.