Filter
Top Products
Adding memory and replacing the CPU
Issue 3.3 February 2003 149
8. Attach an antistatic wrist strap to the metal chassis of the computer and to your wrist.
See the following figure.
9. Disconnect the AC power cord.
!
Important:
!
Important:
Important: If the computer has a PCI card in slot position 2, you may want to remove
that card during this procedure to make it easier to reach the components.
To remove PCI card 2, you must first remove the PCI card 2 screw. On the
Series 1 computers, this screw is on the back of the computer. On Series 2
and later computers, this screw is on the top of the frame above the PCI
card.
u5_wriststrap.cdr
PCI slot 2
screws