Maintenance
72 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
9. Turn on all external SCSI devices starting with the device that is farthest from the
system and working toward the system.
10. Turn on the system monitor.
11. Turn on the system.
12. Press Stop+A simultaneously after the console banner is displayed, but before the
system starts booting.
13. Enter:
boot -r
This reboots the system so that it recognizes the new configuration.
14. Enter the following commands:
sacadm -l
pmadm -l
These commands display existing administration information. Record this information
for later use.
15. Enter:
pmadm -r -p ttysaipslot -r ttyportdesignator
This removes port administration for all SAI/P cards, where slot indicates slot a or
slot b, and portdesignator is the full SAI/P port designation (a000, a001, and so
on).
16. Remove the SAI/P software drivers. Refer to Removing SAI/P drivers and utilities
on
page 75.
17. Install the SAI/P software driver. See your CMS software installation, maintenance,
and troubleshooting document for details.
18. Administer all SAI/P ports cards.
19. Perform a CMSADM file system backup to back up the updated system configuration.
See your CMS software installation, maintenance, and troubleshooting document for
details.