Avaya 585-215-871 Network Hardware User Manual


 
Installation
48 Avaya CMS Sun Ultra 5 Computer Hardware Installation, Maintenance, and Troubleshooting
10. Enter:
probe-scsi-all
This verifies that the system sees all external SCSI devices. A message similar to the
following is displayed:
In this example, the devices listed are as follows:
Target 0 is an external 4.2-GB hard drive.
Target 4 is an external DDS4 tape drive.
Note:
Note: The actual devices listed depends on the devices installed on the SCSI bus.
11. When you have verified that the system recognizes all of its devices, enter the
following commands:
!
CAUTION:
CAUTION: If you fail to enter these commands, any reboots that you do in the future will
stop at the boot prompt instead of proceeding through the normal boot-up
process.
setenv auto-boot? true
boot -r
The system reboots.
/pci@1f,0/pci@1/pci@1/SUNW,isptwo@4
Target 0
Unit 0 Disk QUANTUM VK4550J SUN4.2G8610
Target 4
Unit 0 Removeable Tape HP C5683A C911